Professional Grade     Paving Sealers

Orders can be placed on the website or telephone 0151 292 5112  FREE DELIVERY We currently only deliver to Merseyside and West Lancs

£137.00
incl. VAT
LOCAL DELIVERIES ONLY
Add to shopping cart

Block Paving Sealer 25L FREE LOCAL DELIVERY

For Use On: Block Paving
Article number: 1001
Coverage:  5 - 8 sq m per litre

 

Product/service description

A professional grade, ready-to-use, high solids, clear concrete sealant. For use on -
driveways, paving, car parks, forecourts, pedestrian walkways, etc., Idea for

Application
Light to medium trafficked areas; with correct maintenance and depending
upon surface type, potentially 10 years plus. Externally colour will remain for
1 – 2 years although protective effect will remain for longer, potentially 4 – 6
years, depending upon surface type.

A major design feature of this product is that it is easily re-coatable and does not need stripping before future treatment as maintenance coats cross link into original forming a monolithic layer. Down time is minimised with rapid cure additives. Fading of the colour and reduction in protective effect take place more rapidly in heavily
trafficked areas and these areas can be easily ‘touched up' without the need to
strip the original coat. Lower trafficked areas will only need retreating very
occasionally, if ever.
Benefits
  • Spreads easier and
    dries quicker for faster, high quality, installation
  • Excellent
    inter-coat adhesion for speedy application and a harder wearing surface
  • Excellent
    resistance to rain spotting 
  • Tyre plucks and
    flaking are virtually unheard of
  • 100% UVA Fade
    resistant
  • Increased impact
    and abrasion resistance prolong life span
  • High resin solids
    content (we do NOT use fillers, thickeners or extenders)
  • Excellent coverage
    – 5-8 m2 per litre per coat 
  • Prevents staining
    and stabilises sand joints in block paving
  • Attractive sheen on block paving
  • Early use on new,
    dry, block paving helps prevent white powdery staining (efflorescence)

 

Durability
Light to medium trafficked areas; with correct maintenance and depending
upon surface type, potentially 10 years plus. Externally colour will remain for
1 – 2 years although protective effect will remain for longer, potentially 4 – 6
years, depending upon surface type.


 

Maintenance

 

Sweep regularly to remove abrasive dirt and grit from the surface and rinse
down weekly with a hose [not jet washer] externally or internally mop weekly
using a mild detergent if required. Spills and marks should be wiped up as soon
as possible and not allowed to dry on.
Should signs of wear appear a maintenance coat can be applied. Clean and thoroughly dry surface to be treated. Apply single ‘tight' coat in accordance with standard application instructions. The new coat will cross link into earlier coats so there is no need to strip unless resin build up or blemishes are an issue.

Display more >>


Block Paving Sealer 25L FREE LOCAL DELIVERY

£137.00 incl. VAT
LOCAL DELIVERIES ONLY
For Use On: Block Paving
Article number: 1001
Coverage:  5 - 8 sq m per litre

 

Product/service description

A professional grade, ready-to-use, high solids, clear concrete sealant. For use on -
driveways, paving, car parks, forecourts, pedestrian walkways, etc., Idea for

Application
Light to medium trafficked areas; with correct maintenance and depending
upon surface type, potentially 10 years plus. Externally colour will remain for
1 – 2 years although protective effect will remain for longer, potentially 4 – 6
years, depending upon surface type.

A major design feature of this product is that it is easily re-coatable and does not need stripping before future treatment as maintenance coats cross link into original forming a monolithic layer. Down time is minimised with rapid cure additives. Fading of the colour and reduction in protective effect take place more rapidly in heavily
trafficked areas and these areas can be easily ‘touched up' without the need to
strip the original coat. Lower trafficked areas will only need retreating very
occasionally, if ever.
Benefits
  • Spreads easier and
    dries quicker for faster, high quality, installation
  • Excellent
    inter-coat adhesion for speedy application and a harder wearing surface
  • Excellent
    resistance to rain spotting 
  • Tyre plucks and
    flaking are virtually unheard of
  • 100% UVA Fade
    resistant
  • Increased impact
    and abrasion resistance prolong life span
  • High resin solids
    content (we do NOT use fillers, thickeners or extenders)
  • Excellent coverage
    – 5-8 m2 per litre per coat 
  • Prevents staining
    and stabilises sand joints in block paving
  • Attractive sheen on block paving
  • Early use on new,
    dry, block paving helps prevent white powdery staining (efflorescence)

 

Durability
Light to medium trafficked areas; with correct maintenance and depending
upon surface type, potentially 10 years plus. Externally colour will remain for
1 – 2 years although protective effect will remain for longer, potentially 4 – 6
years, depending upon surface type.


 

Maintenance

 

Sweep regularly to remove abrasive dirt and grit from the surface and rinse
down weekly with a hose [not jet washer] externally or internally mop weekly
using a mild detergent if required. Spills and marks should be wiped up as soon
as possible and not allowed to dry on.
Should signs of wear appear a maintenance coat can be applied. Clean and thoroughly dry surface to be treated. Apply single ‘tight' coat in accordance with standard application instructions. The new coat will cross link into earlier coats so there is no need to strip unless resin build up or blemishes are an issue.

Display more >>


£137.00
incl. VAT
LOCAL DELIVERIES ONLY
Add to shopping cart

Pattern Imprinted Concrete Sealer 25L FREE LOCAL DELIVERY

For Use On: Pattern Imprinted Concrete Sealer
Article number: 1003
Coverage:  5 - 8 sq m per litre

 

Product/service description

A professional grade, ready-to-use, high solids, clear concrete sealant. For use on -
driveways, paving, car parks, forecourts, pedestrian walkways, etc., Idea for

Application
Light to medium trafficked areas; with correct maintenance and depending
upon surface type, potentially 10 years plus. Externally colour will remain for
1 – 2 years although protective effect will remain for longer, potentially 4 – 6
years, depending upon surface type.

A major design feature of this product is that it is easily re-coatable and does not need stripping before future treatment as maintenance coats cross link into original forming a monolithic layer. Down time is minimised with rapid cure additives. Fading of the colour and reduction in protective effect take place more rapidly in heavily
trafficked areas and these areas can be easily ‘touched up' without the need to
strip the original coat. Lower trafficked areas will only need retreating very
occasionally, if ever.
Benefits
  • Spreads easier and
    dries quicker for faster, high quality, installation
  • Excellent
    inter-coat adhesion for speedy application and a harder wearing surface
  • Excellent
    resistance to rain spotting 
  • Tyre plucks and
    flaking are virtually unheard of
  • 100% UVA Fade
    resistant
  • Increased impact
    and abrasion resistance prolong life span
  • High resin solids
    content (we do NOT use fillers, thickeners or extenders)
  • Excellent coverage
    – 5-8 m2 per litre per coat 
  • Prevents staining
    and stabilises sand joints in block paving
  • Tints and pigments available for a tinted or coloured finish
  • Medium gloss finish on Imprinted concrete

 

Durability
Light to medium trafficked areas; with correct maintenance and depending
upon surface type, potentially 10 years plus. Externally colour will remain for
1 – 2 years although protective effect will remain for longer, potentially 4 – 6
years, depending upon surface type.

 

Maintenance

 

Sweep regularly to remove abrasive dirt and grit from the surface and rinse
down weekly with a hose [not jet washer] externally or internally mop weekly
using a mild detergent if required. Spills and marks should be wiped up as soon
as possible and not allowed to dry on.
Should signs of wear appear a maintenance coat can be applied. Clean and thoroughly dry surface to be treated. Apply single ‘tight' coat in accordance with standard application instructions. The new coat will cross link into earlier coats so there is no need to strip unless resin build up or blemishes are an issue.

Display more >>


Pattern Imprinted Concrete Sealer 25L FREE LOCAL DELIVERY

£137.00 incl. VAT
LOCAL DELIVERIES ONLY
For Use On: Pattern Imprinted Concrete Sealer
Article number: 1003
Coverage:  5 - 8 sq m per litre

 

Product/service description

A professional grade, ready-to-use, high solids, clear concrete sealant. For use on -
driveways, paving, car parks, forecourts, pedestrian walkways, etc., Idea for

Application
Light to medium trafficked areas; with correct maintenance and depending
upon surface type, potentially 10 years plus. Externally colour will remain for
1 – 2 years although protective effect will remain for longer, potentially 4 – 6
years, depending upon surface type.

A major design feature of this product is that it is easily re-coatable and does not need stripping before future treatment as maintenance coats cross link into original forming a monolithic layer. Down time is minimised with rapid cure additives. Fading of the colour and reduction in protective effect take place more rapidly in heavily
trafficked areas and these areas can be easily ‘touched up' without the need to
strip the original coat. Lower trafficked areas will only need retreating very
occasionally, if ever.
Benefits
  • Spreads easier and
    dries quicker for faster, high quality, installation
  • Excellent
    inter-coat adhesion for speedy application and a harder wearing surface
  • Excellent
    resistance to rain spotting 
  • Tyre plucks and
    flaking are virtually unheard of
  • 100% UVA Fade
    resistant
  • Increased impact
    and abrasion resistance prolong life span
  • High resin solids
    content (we do NOT use fillers, thickeners or extenders)
  • Excellent coverage
    – 5-8 m2 per litre per coat 
  • Prevents staining
    and stabilises sand joints in block paving
  • Tints and pigments available for a tinted or coloured finish
  • Medium gloss finish on Imprinted concrete

 

Durability
Light to medium trafficked areas; with correct maintenance and depending
upon surface type, potentially 10 years plus. Externally colour will remain for
1 – 2 years although protective effect will remain for longer, potentially 4 – 6
years, depending upon surface type.

 

Maintenance

 

Sweep regularly to remove abrasive dirt and grit from the surface and rinse
down weekly with a hose [not jet washer] externally or internally mop weekly
using a mild detergent if required. Spills and marks should be wiped up as soon
as possible and not allowed to dry on.
Should signs of wear appear a maintenance coat can be applied. Clean and thoroughly dry surface to be treated. Apply single ‘tight' coat in accordance with standard application instructions. The new coat will cross link into earlier coats so there is no need to strip unless resin build up or blemishes are an issue.

Display more >>


£167.00
incl. VAT
LOCAL DELIVERIES ONLY
Add to shopping cart

Indian Sandstone & Slate Sealer 25L FREE LOCAL DELIVERY

Type: Stone & Slate Protector
For Use On:Natural stone
Article number: 1005
Coverage:  6 - 10 sq m per litre

 

Product/service description
Our Stone & Slate Protector has been uniquely designed to
give outstanding results on natural materials such as Stone, Slate, Travetine,
Terracotta, and even Clay (in clay paviors)
 
Geological materials have different physical and chemical structures from
man-made products which is why they need special treatment
Benefits
  • The only sealer specifically
    designed for natural products
  • Spreads easier and dries quicker for faster, high quality, installation
  • Excellent inter-coat adhesion
    for speedy application and a hard wearing surface
  • Excellent resistance to rain
    spotting
  • Tyre plucks and flaking are
    virtually unheard of
  • Naturally excellent coefficient
    of friction [CoF] for good underfoot grip
  • No need to strip before
    ‘touching up’ or ‘re-sealing’ in years to come – just clean and recoat
  • 100% UVA and Fade resistant
  • Increased impact, abrasion and
    chemical resistance for increased life span
  • High ‘resin only’ solids content
    (we do NOT use fillers, thickeners or extenders)
  • Excellent coverage – 6-10 m2 per
    coat per litre
  • Supplied in 5ltr, 20ltr &
    25ltr UN containers

 

Durability
Indoors and light to medium trafficked areas; with correct maintenance and
depending upon surface type, potentially 10 years plus. Externally colour will
remain for 1 – 2 years although protective effect will remain for longer,
potentially 4 – 6 years, depending upon surface type.

A major design feature of this product is that it is easily re-coatable and does not need stripping before future treatment as maintenance coats cross link into original
forming a monolithic layer. Down time is minimised with rapid cure additives.
Fading of the colour and reduction in protective effect take place more rapidly
in heavily trafficked areas and these areas can be easily ‘touched up' without
the need to strip the original coat. Lower trafficked areas will only need
retreating very occasionally, if ever.
 

Maintenance

 

Sweep regularly to remove abrasive dirt and grit from the surface and rinse
down weekly with a hose [not jet washer] externally or internally mop weekly
using a mild detergent if required. Spills and marks should be wiped up as soon
as possible and not allowed to dry on.
Should signs of wear appear a maintenance coat can be applied. Clean and thoroughly dry surface to be treated. Apply single ‘tight' coat in accordance with standard application instructions. The new coat will cross link into earlier coats so there is no need to strip unless resin build up or blemishes are an issue.

Display more >>


Indian Sandstone & Slate Sealer 25L FREE LOCAL DELIVERY

£167.00 incl. VAT
LOCAL DELIVERIES ONLY
Type: Stone & Slate Protector
For Use On:Natural stone
Article number: 1005
Coverage:  6 - 10 sq m per litre

 

Product/service description
Our Stone & Slate Protector has been uniquely designed to
give outstanding results on natural materials such as Stone, Slate, Travetine,
Terracotta, and even Clay (in clay paviors)
 
Geological materials have different physical and chemical structures from
man-made products which is why they need special treatment
Benefits
  • The only sealer specifically
    designed for natural products
  • Spreads easier and dries quicker for faster, high quality, installation
  • Excellent inter-coat adhesion
    for speedy application and a hard wearing surface
  • Excellent resistance to rain
    spotting
  • Tyre plucks and flaking are
    virtually unheard of
  • Naturally excellent coefficient
    of friction [CoF] for good underfoot grip
  • No need to strip before
    ‘touching up’ or ‘re-sealing’ in years to come – just clean and recoat
  • 100% UVA and Fade resistant
  • Increased impact, abrasion and
    chemical resistance for increased life span
  • High ‘resin only’ solids content
    (we do NOT use fillers, thickeners or extenders)
  • Excellent coverage – 6-10 m2 per
    coat per litre
  • Supplied in 5ltr, 20ltr &
    25ltr UN containers

 

Durability
Indoors and light to medium trafficked areas; with correct maintenance and
depending upon surface type, potentially 10 years plus. Externally colour will
remain for 1 – 2 years although protective effect will remain for longer,
potentially 4 – 6 years, depending upon surface type.

A major design feature of this product is that it is easily re-coatable and does not need stripping before future treatment as maintenance coats cross link into original
forming a monolithic layer. Down time is minimised with rapid cure additives.
Fading of the colour and reduction in protective effect take place more rapidly
in heavily trafficked areas and these areas can be easily ‘touched up' without
the need to strip the original coat. Lower trafficked areas will only need
retreating very occasionally, if ever.
 

Maintenance

 

Sweep regularly to remove abrasive dirt and grit from the surface and rinse
down weekly with a hose [not jet washer] externally or internally mop weekly
using a mild detergent if required. Spills and marks should be wiped up as soon
as possible and not allowed to dry on.
Should signs of wear appear a maintenance coat can be applied. Clean and thoroughly dry surface to be treated. Apply single ‘tight' coat in accordance with standard application instructions. The new coat will cross link into earlier coats so there is no need to strip unless resin build up or blemishes are an issue.

Display more >>


£13.60
incl. VAT
LOCAL DELIVERIES ONLY
Add to shopping cart

Matting Additive FREE LOCAL DELIVERY (when purchased with any seal)

ForUseWith :Sealer
Coverage1 tub is sufficient for a low sheen in a 25litre pail of resin. For a matt finish you will require two tubs of matting agent.

 

Product/service description
All resin products produce some degree of gloss finish. Don’t be fooled by a product advertised as Matt finish at a lower price than a gloss finish. This just means there is LESS resin in the blend so it will not last as long because strength and wear quality are being lost.
 
The correct way is to add a matting agent.
Simply mix AdMat Matting Additive thoroughly into your chosen resin. 1 tub is sufficient for a low sheen in a 25litre pail of resin. For a matt finish you will require two tubs of matting agent.

Display more >>


Matting Additive FREE LOCAL DELIVERY (when purchased with any seal)

£13.60 incl. VAT
LOCAL DELIVERIES ONLY
ForUseWith :Sealer
Coverage1 tub is sufficient for a low sheen in a 25litre pail of resin. For a matt finish you will require two tubs of matting agent.

 

Product/service description
All resin products produce some degree of gloss finish. Don’t be fooled by a product advertised as Matt finish at a lower price than a gloss finish. This just means there is LESS resin in the blend so it will not last as long because strength and wear quality are being lost.
 
The correct way is to add a matting agent.
Simply mix AdMat Matting Additive thoroughly into your chosen resin. 1 tub is sufficient for a low sheen in a 25litre pail of resin. For a matt finish you will require two tubs of matting agent.

Display more >>


£13.60
incl. VAT
LOCAL DELIVERIES ONLY
Add to shopping cart

Low-Slip Granules FREE LOCAL DELIVERY (when purchased with any seal)

ForUseWith :Sealer
CoverageOne tub is sufficient for one 25ltr pail of resin.

 

Product/service description

Low Slip is a hard wearing low-slip additive combining a wide range of particulate size. 

 

Newly sealed and wet paving and flooring can be slippery. 
 

Display more >>


Low-Slip Granules FREE LOCAL DELIVERY (when purchased with any seal)

£13.60 incl. VAT
LOCAL DELIVERIES ONLY
ForUseWith :Sealer
CoverageOne tub is sufficient for one 25ltr pail of resin.

 

Product/service description

Low Slip is a hard wearing low-slip additive combining a wide range of particulate size. 

 

Newly sealed and wet paving and flooring can be slippery. 
 

Display more >>


FOR BEST RESULTS PLEASE FOLLOW MANUFACTURERS INSTRUCTIONS 

* Technical Data Sheet

* Safety Data Sheet

* Application Instructions

Provided with each product ordered.

 We supply sealers to Merseyside, Liverpool, Aintree, St.Helens and Crosby. We supply sealers to  Bootle, Seaforth, Ormskirk, Eccleston, Knowsley, Fazakerley, Melling, Newton-le-Willows, Kirkby, Walton, Little Crosby, Anfield, Toxteth, Woolton, Mossley Hill, Speke, Halewood. Birkdale, Formby, Aughton and Ainsdale.

How To Contact Us:

aapfloorcare@gmail.com

(24 Hours)

Telephone:

0151 520 9405

01695 816105

General Enquiries

(09.00- 17.00)

Answer Machine Available For Messages Out Of Hours

--------------------------

AaP Floorcare

Proprietor:

Paul Clarke

Admin:

Paula Clarke

Catherine Flynn (Thursday, November 28 13 06:22 pm GMT)

I have had dealings with Paul over an approximate ten year period and I have always found his work to be exemplary. Polite and respectful, Paul is a person of honesty and integrity, professional to the letter. i have no hesitation in recommending him in any strand of his work.



Armed Forces Discounts
Print | Sitemap
A&P Cleaning Services

Call

E-mail